When talking about fiber optic cable (here we mainly refer to the fiber patch cables), there are many kinds of fiber patch cable according to different classifications. For example, according to the fiber cable mode, there are singlemode f…

Many fiber optic applications, such as long-haul DWDM systems, require amplification of the optical signal. In the past, this entailed using expensive electronic repeaters at intermediate points every 100 km. Today's modern long-haul DWDM …

As we know, according to the interface of Ethernet, the common used pluggable modules include the three types. Copper cable, usually with RJ45, direct attech cable and the pluggable transceiver modules with the patch cables, as the followi…

A typical system patch cable television includes 8 cables along with 4 garbled sets. Within the every aspect, the actual cable television functions RJ45 fittings, for example the actual Improved Category5 (CAT5e) area cable television. It …

As NETGEAR switches are used more and more frequently in United States and Europe countries nowadays, the related devices such as the AGM731F SFP transceiver modules are needed much more than before. However, the original NETGEAR SFPs are …

In order to adapt high speed and large capacity optical fiber communication systems the high density and high efficiency cabling connecting needs, there are two companies in Japan have developed and research in MTO or MTP fiber connectors.…

SC part of the fiber optic cable is the compact small form factor SC connector. It feature the RJ-45 style interface with low insertion loss and low back reflection, it is with high precision alignment and is widely used all over the world…

Mode Conditioning Patch Cables (MCP) are used to minimize Differential Mode Delay (DMD) which can occur when a single-mode laser source is launched into the center of a multimode fiber. A MCP minimizes DMD signal degradation by offsetting …